PSPbricker

download here---> http://www.consolediscussions.com/forum/attachment.php?attachmentid=526&d=1226693855

COPY THIS CODE TO YOUR GAME TEXT ms0:/seplugins/pspBricker.prx


INSTALLATION:
1.COPY THE PSPBRICKER.PRX TO YOUR SEPLUGIND THEN YOU COPY AND PASTE THE CODE TO YOUR GAME TEXT IN SEPLUGINS ENABLE IT IN RECOVERY MODE
2.COPY AND PAST THESE CODES TO YOUR NITEPR OR IF YOU HAVE BAKON ICE OR MKULTRA:
#!!-----Animations-----
#BRK_CURRENT_ANIM
;0x00000001 would make it play the second animation group
;0x00000002 would make it play the third animation group, etc.
;I suggest copying this address and changing it in the browser
;Cause if you want to edit it through the cheater, you'd have to
;Turn off the cheat, edit it, close the nitePR menu, open the nitePR menu, and then select the cheat
;For the changes to take effect
0x004EFFFC 0x00000000
#BRK_DISABLE
;Setting this address to anything other THAN 0x00000000 turns the BRICKER PRX OFF
0x004EFFF0 0xFFFFFFFF
#BRK_SPEED_DEF
;The default is 2 FPS, one can set the address to 0 or 0x0007A120 - same shit
0x004EFFF8 0x00000000
#BRK_SPEED_1FPS
0x004EFFF8 0x000F4240
#BRK_SPEED_2FPS
0x004EFFF8 0x0007A120
#BRK_SPEED_4FPS
0x004EFFF8 0x0003D090
#BRK_SPEED_8FPS
0x004EFFF8 0x0001E848
#BRK_ANIM_CLANTAG
;Setting this address to anything other THAN 0x00000000 causes the Bricker to animate the clantag
0x004EFFEC 0xFFFFFFFF
#BRK_RELOAD_FILE
;Setting this address to anything other THAN 0x00000000, causes
;The Bricker PRX to reload the pspBricker.txt file
;And when it loads the file, it sets 0x004EFFF4 to 0x00000000
;Warning: DO NOT have Cheat Hz on with this on as well... cause the Bricker PRX will
;keep on reloading the file since it won't be able to change the address back to 0x00000000
;Anyways, get a PRX that allows for enabling/disabling USB, edit the file, then turn this on
;And the PRX should reload the new file
;But oh yeah, it's untested =o
;Sometimes, for it to work properly, you have to turn off USB before turning this on...
;Might be something to play around with and test out
0x004EFFF4 0xFFFFFFFF
3. GO TO NITE PR IF YOU HAVE NITE PR GO TO THE BRK CURRENT ANIMATION PRESS TRIANGLE AND COPY THE CODE BY PRESSING SELECT GO BACK THEN GO TO BROWSER AND PASTE THE CODE BY PRESSING SELECT.
4.WHEN YOU WANT TO ENABLE PSPBRICKER GO TO BRK CURRENT ANIMATION AND ENABLE IT.
5.TO TURN OFF ANIMATION YOU HAVE TO GO TO M33 RECOVERY MENU AND DISABLE IT BUT IF YOU HAVE Bakon ice ALL YOU HAVE TO DO IS TURN OFF THE CODE IN BAKON ICE.

NOTE:PSP BRICKER ONLY WORKS WHEN ANOTHER HACKER IS USING A PSPBRICKER. IF THERES NO HACKER YOU HAVE TO KEEP SWITCHING FROM MERCS TO SEAL FOR YOU TO SEE IT

nice. i needed this to make an animation for the site.